24" / 51" Shaker, Dryer & Purifier All In One

The 24" Classic DTF shaker and dryer system is perfect for pairing with a 2 or 4 head Direct to Film printer. The dryer arrives fully assembled ready to use.

24" / 51" Maximum width

Conveyor belt 

Vacuum blowers to hold film down

Manual and Automatic modes.

Touchscreen controls

Easy access doors

Dryer: 40" wide x 92" deep x 41" high

A/C 220v 20amps Regulated L6-20 Style outlet.

Climate control set to 70-75 degrees and 40 - 60% humidity

 24" Compact Automatic TPU Adhesive Powder Shaker and Dryer Machine
With a touch screen display controller, simple to use.
Infrared drying and heating improves and protects color reproduction. 

· With a warming inlet platform, automatic powder dispenser, paddle to remove excess powder, 4 bulb tunnel dryer and roll up at the end.
· This all in one unit takes over by evenly spreading, then melting the needed amount of adhesive material directly onto your printed image, saving time, effort, and cost.
· Infrared drying and heating improves and protects color reproduction.
· Customized powder recycling drawer, increases effectiveness.
· Shake powder control, dusting control, PID setting of curing temperature.
· Automatic powder feeding, evenly spreading powder. 

Maximum Shake Powder Width: 600mm (23.6inches)
Functions: Shake powder control, dusting control, PID setting of curing temperature
Heating Element: Quartz infrared heat drying tube
Rewinding Function: Automatic induction rewinding
Heating and Drying Mode: Front guide plate heating, upper drying curing
Cooling Mode: 3 fan air cooling (Single row)
Machine Size: 35.4in x 33.1in x 42.6in (900mm x 840mm x 1082mm)
Machine Weight: 280lbs (140kg)
Packaging Size: 47.2in x 40.9in x 44.9in (1200mm x 1040mm x 1140mm)
Gross Weight: 396lbs (180kg)
Working Power Supply: AC110V, 50hz / 60hz, 1 phase.
Current: 28A, 3000W
Powder spreading structure: The motor drives the brush to rotate to brush the hot melt powder out of the powder box.
Powder shaking device: the motor drives the powder shaking lever to beat the film to clean up excess hot melt powder. 

130W Fume Extractor Filter and Air Purifier 240m³/h for smaller A3 DTF Powder Shakers
The fume extractor is designed extract smoke and oil gases: the pre-filter and filter capture the particles while the gas filter captures odors. 

The new compact smoke filter is specially designed for the smoke filtration requirements of small equipment. It makes good use of internal oil and smoke filter bin.. It is usually used to deal with the smoke extract and filtration tasks of equipment such as small powder shakers (such as A3 powder shaker). Universal design, connect the hose to any small DTF printer open and use.

Rated Voltage: AC 110V ± 5%
Rated Current: 1.2A
Rated Power: 130W
Energy consumption: 60~130W
Max air amount: 240m³/h
Noise: ≤ 65db
Machine Size: 13.15in x 14.8in x 27.8in (334mm x 376mm x 706mm)
Machine Weight: 66lbs (30kg)
Package Size: 18.1in x 16.5in x 33in (460mm x 420mm x 840mm)
Gross Weight: 88lbs (40kg) 

High efficiency filter: This smoke extractor continuously pulls in your DTF powder shaker's fumes and oil, running them progressively through its pre filter and inner activated carbon filters to absorb all harmful gases and odors.
Full-scale design can be used with multiple DTF shakers.

Rated Voltage: AC 110V ± 5%
Rated Current: 8.2A
Rated Power: 900W
Energy consumption: 700~900W
Max air amount: 1200m³/h
Noise: ≤ 70db
Machine Size: 28.4in x 27.6in x 65.6in (722mm x 700mm x 1665.5mm)
Machine Weight: 396.8lbs (180kg)
Package Size: 34.6in x 32.3in x 74in (880mm x 820mm x 1880mm)
Gross Weight: 496lbs (225kg)
Warranty: 1-year warranty on this Fume Extractor.